Pattern rendering · Semi-Gloss Black · illustrative
4 pattern renderings · 3D view
Quatrefoil Tracery
5052 aluminum · 1/8 in · powder-coated · made by FortiFab in Langley, BC
From US$165 Planning estimate per panel · Minimum order US$185
Another size, scale or spacing? Customize this pattern
The cut, formed and powder-coated panel.
24 × 48 in · Semi-Gloss Black · Panel only
Planning estimates for one powder-coated panel, before tax and freight. Minimum order US$185 — smaller orders are priced at the minimum. Your written quote prices your size, quantity and kit, with delivered freight.
- Open area
- 62% open · Open · openings up to 5.45 in
- Written quote
- Within 24–48 hours.
- Install
- We fabricate and ship; your contractor installs.
The pattern
Gothic quatrefoils set in roundels, with cusped four-point spandrels between them, in one continuous tracery.
Drawn to fit each panel. One composition drawn for your panel face: it is redrawn to each size, never cropped. It cannot continue across a panel array.
Specifications
| Material | 5052 aluminum |
|---|---|
| Sheet thickness | 1/8 in (0.125 in) |
| Size | 24 × 48 in |
| Other sizes | Made to your size: one panel's flat blank is up to 59.5 × 119.5 in, and folded edges come out of that. Larger sizes are made as a panel array. |
| Pattern | Quatrefoil Tracery |
| Pattern family | Heritage |
| Layout | Drawn to fit each panel |
| Finish | Powder-coated: Semi-Gloss Black |
| Open area | 62% open · Open |
| Largest opening | 5.45 in (139 mm) across |
| Price | Priced on a written quote |
Customize this pattern Request a PDF drawing Ask about these details
Documents
- File type:PDF · 21 KB Download: Quatrefoil Tracery spec sheet
Quatrefoil Tracery spec sheet
One page: the pattern, the panel facts and spec-lock wording for your drawings.
- File type:TXT · 4 KB Download: Section 05 70 00 guide specification
Section 05 70 00 guide specification
Decorative Metal, in three parts, naming this pattern and finish. Edit it into your project manual.
- File type:DXF · 8 KB Download: Panel envelope drawing
Panel envelope drawing
The largest one-piece face, its solid border and fixing zones. No pattern geometry.
- File type:PDF · DXF Request: Production files
Production files
Drawings and cutting files for your panels, with your written quote.
Make it yours
Beyond the listed sizes: the ways to make this item yours, and how each is priced.
- Open in the designer
Customize this pattern
Change the size, scale and spacing in the panel designer and see it checked for cutting.
- Start from your artwork
Your own artwork
Turn a logo, sketch or photo into a panel and see it checked for cutting.
- Ask for samples
Samples
Powder-coated finish chips and a laser-cut edge sample, at no charge.
Collect sizes, finishes and quantities as you go. Your project list Get a project quote
Langley, BC
Made by FortiFab
Planters & Panels is the planter and panel line of FortiFab, a sheet-metal fabricator in Langley, BC. The same shop that laser-cuts, forms and welds for industrial customers cuts and powder-coats every panel.
About FortiFabPhotos from the FortiFab shop, Langley, BC.
Forming metal at the press brake. 
Joining metal components in the fabrication shop. 
Grinding a fabricated assembly before the next operation.
