Custom stainless backsplash and wall panel calculator
Size stainless backsplashes, wall protection sheets, equipment panels, and counter guards — estimate blank size, hem allowance, weight, and cutout complexity for custom sheet-metal fabrication.
Panel summary
Updates as you edit. Solid outline is the finished panel; dashed is the flat blank.
Estimated price
$335.80 eachsmall-batch rate
$671.60 total for 2 pcs · Instant estimate — FortiFab confirms final pricing.
- Quantities of 10 or fewer carry the shop small-batch rate; unit price drops at 11+.
Flat blank 50 × 32 in · 27.74 lb each · 55.49 lb total for 2 pcs
Excluded from the instant estimate (priced on review): brushed-finish/grain direction matching and protective film.
- Finished area
- 10 ft²
- Weight each
- 27.74 lb
- Complexity
- 11
Complexity is a unitless index from cutouts, fastener count, and edge work — higher means more programming, deburring, and finishing time in review.
Panel inputs
All dimensions are in inches. Enter finished dimensions — hem and return allowances are added to the flat blank automatically.
Custom stainless sheet for commercial kitchens, shops, utility rooms, and equipment walls.
Common for kick plates, wall panels, covers, and wash-down areas.
Edge style
Adds material allowance for a fully hemmed panel perimeter.
Finished size
Width
Height
Installed face dimensions — the blank adds the edge allowance.
Cutouts & fastening
Outlets / cutouts
Fasteners / holes
Outlets, switches, notches, and visible fastener or hole locations drive the complexity index.
Settings are saved automatically in your browser.
Instant estimate breakdown
Priced per panel with FortiFab's shop estimating rates from blank area, laser cut length, pierces, and hem bends. Instant estimate — FortiFab confirms final pricing.
- Material (blank + nesting allowance)
- $85.33
- Laser cutting (11 pierces)
- $0.46
- Hem / edge bends (4)
- $30.00
- Welded seams
- $0.00
- Brushed finish / protective film
- Priced on review
- Subtotal before markup
- $115.79
- With 45% shop markup
- $167.90
- Unit at small-batch rate (qty 1–10)
- $335.80
- Total for 2 pcs
- $671.60
- Quantities of 10 or fewer carry the shop small-batch rate; unit price drops at 11+.
Cut pricing assumes nominal 2 × 4 in outlet/switch cutouts and treats fastener holes as laser pierces — FortiFab confirms exact geometry from your drawings. Excluded from the instant estimate (priced on review): brushed-finish/grain direction matching and protective film.
Panel quote summary
Attach or paste this summary when you request your quote — it gives FortiFab the details needed to confirm material, finish, and fabrication.
- Panel use
- Stainless backsplash
- Material
- 304 stainless steel · 0.06 in thick
- Finished size
- 48 × 30 in · 10 ft²
- Blank / edge
- 50 × 32 in · Hem all four edges
- Cutouts
- 2 cutouts · 8 fastener/hole locations
- Weight
- 27.74 lb each · 55.49 lb total for 2 pcs
- Complexity
- 11 — unitless index from cutouts, fastening, and edge work
- Estimate
- $335.80 each · $671.60 total for 2 pcs · small-batch rate — instant estimate, FortiFab confirms final pricing
- Priced on review
- Brushed-finish/grain direction matching and protective film are excluded from the instant estimate and quoted during FortiFab review.
- Details to send
- Finish direction, protective film, exposed-edge treatment, corner radius, cutout coordinates, and whether dimensions are finished or flat blank dimensions.
Finish details to send
Finish direction, protective film, exposed-edge treatment, corner radius, cutout coordinates, and whether dimensions are finished or flat blank dimensions.
Common related parts
Kick plates, push plates, wall guards, backsplash panels, equipment covers, trim pieces, and formed returns often share the same fabrication workflow.
Planning output only. FortiFab confirms final material, tooling, bend deductions, hardware, tolerances, finishes, and manufacturability during quote review.
Stainless panel quote guide
Size stainless backsplashes, wall guards, and custom panels
Use this calculator to prepare stainless backsplash, wall protection, counter guard, and equipment panel RFQs. Include finished size, material grade, thickness, grain direction, hem or edge treatment, cutouts, fasteners, and installation constraints.
Common searches
- stainless backsplash calculator
- custom stainless wall panel
- stainless wall guard
- sheet metal backsplash
Best buyer use cases
- Commercial kitchen or shop wall protection
- Equipment back panels and counter guards
- Custom stainless panels with cutouts, holes, hems, or protective film
Ready to turn this into a reviewed fabrication quote?
Send drawings, sketches, material, thickness, finish, quantity, and any fit-up requirements so FortiFab can review manufacturability.
Stainless backsplash and wall panel FAQs
Custom sheet panels need clear dimensions, finish direction, exposed edges, and cutout details.
Estimated price
$335.80 each · 50 × 32 in blank