Custom kick plate calculator for stainless and sheet metal doors
Size kick plates, mop plates, armor plates, and push plates from actual door dimensions. Estimate plate width, material area, weight, mounting-hole counts, and instant shop-rate pricing before requesting custom FortiFab fabrication.
Plate preview
Updates as you edit — drawn to scale on your door.
Estimated price
Small-batch rate$53.20 each
$212.80 total for 4 pcs · Instant estimate — FortiFab confirms final pricing.
- Quantities of 10 or fewer carry the shop small-batch rate; unit price drops at 11+.
- Plate size
- 34.0 × 10.0 in
- Weight each
- 5.90 lb
- Mounting holes
- 11
FortiFab confirms final sizes, hole pattern, and finish during quote review.
Plate inputs
All dimensions are in inches. Picking a plate type applies its usual height; picking a material applies a typical thickness — both stay editable.
Plate type
Common lower-door protection for commercial doors, shop doors, and service areas.
Door size
Width
Height
Measure the finished door leaf, not the frame opening.
Plate fit
Clearance / side
Plate height
Plate width = door width minus clearance on both sides.
Corner treatment
0.25–1 in. Included in the cut-length estimate; FortiFab confirms tooling.
Common for kick plates, wall panels, covers, and wash-down areas.
Thickness and quantity
Thickness
Quantity
1–10 pcs price at the shop small-batch rate; unit price drops at 11+.
Fastener pattern
Approximate perimeter spacing; at least four corner holes are planned. Set 0 for adhesive-only mounting.
Clearance hole drawn and included in the cut-length estimate.
Flat-head screws sit flush. Priced per hole in the estimate.
Options and extras
Oval 4 × 1.25 in grip cutout — adds cut length and one pierce to the estimate.
Eased / beveled edge appearance — priced on FortiFab review, not in the instant estimate.
Peel-off PVC film on the finished face — priced on FortiFab review, not in the instant estimate.
Settings are saved automatically in your browser.
AI artwork concept
Describe engraving or cut artwork and preview it on the plate. Concept artwork — not production geometry; FortiFab reviews engraving/cut feasibility.
Recommended quote notes
Attach or paste this summary with your quote request — it gives FortiFab the details needed to confirm the plates.
- Plate type
- Door kick plate
- Plate size
- 34.000 × 10.000 in · 0.060 in thick
- Door
- 36.0 × 84.0 in · 1.000 in clearance each side
- Material
- 304 stainless steel
- Edge note
- Rounded corners
- Corners
- Radiused corners · 0.50 in
- Mounting
- 11 × 0.188 in holes · ~8.0 in spacing
- Finish
- Mill finish (as-cut)
- Area each
- 2.36 ft²
- Weight
- 5.90 lb each · 23.58 lb total for 4 pcs
- Coverage
- ≈ 11.9% of door height
- Estimate
- $53.20 each · $212.80 total for 4 pcs · small-batch rate
Planning output only. FortiFab confirms final material, tooling, bend deductions, hardware, tolerances, finishes, and manufacturability during quote review.
Price breakdown (each)
Shop-rate cost model from your current inputs. Instant estimate — FortiFab confirms final pricing.
- Material
- $18.13
- Laser cutting + pierces
- $0.25
- Bends
- $0.00
- Welds
- $0.00
- Finish (powder coat)
- $0.00
- Shop subtotal
- $18.38
- With 45% markup
- $26.60
- Small-batch rate (qty ≤ 10)
- × 2.0
- Unit estimate
- $53.20
- Total for 4 pcs
- $212.80
Instant estimate — FortiFab confirms final pricing.
Plate planning notes
Quick guidance before you release sizes for fabrication.
Height proportion
This plate covers about 11.9% of the door height. Taller armor plates are better for cart traffic; shorter mop plates suit cleaning protection.
What to confirm
Confirm door bevels, stops, weather seals, screw type, countersinking, corner radius, grain direction, and whether adhesive or fasteners will be used.
Need custom metal door plates?
Send dimensions, material, hole pattern, finish direction, and quantity for a FortiFab quote review.
Kick plate quote guide
Size custom kick plates, mop plates, and push plates for fabrication
Use this calculator to turn door dimensions into quote-ready stainless, aluminum, or steel kick plates. The strongest RFQs include finished plate size, clearance, grain direction, edge finish, hole pattern, protective film, and installation constraints.
Common searches
- kick plate calculator
- custom door kick plate
- stainless mop plate
- armor plate fabrication
Best buyer use cases
- Commercial door protection plates
- Food-service or industrial wall/door protection
- Retrofit plates where hole positions and finish direction matter
Ready to turn this into a reviewed fabrication quote?
Send drawings, sketches, material, thickness, finish, quantity, and any fit-up requirements so FortiFab can review manufacturability.
Kick plate sizing FAQs
Use actual door dimensions and hardware constraints before releasing custom kick plates or push plates.
Estimated price
$53.20 each · $212.80 total