Custom electrical enclosure RFQ generator
Configure a sheet-metal enclosure shell, control cabinet, junction box, or vented cover and generate the dimensions, material, cutout, hardware, weight, and review notes FortiFab needs for a cleaner enclosure RFQ.
Enclosure RFQ brief
Updates as you edit. Copy the notes or send them with your quote request.
Estimated weight
50.82 lb each
254.1 lb total for 5 pcs · 20.74 ft² developed sheet each · planning output only — FortiFab confirms details during quote review.
- Sheet area each
- 20.74 ft²
- Panels
- ≈6
- Complexity
- 19
Configure enclosure
All dimensions are in inches. The output is RFQ planning data — FortiFab reviews drawings before pricing.
Enclosure style
Door or cover style
Good default for painted or powder-coated industrial parts.
Enclosure size
Width
Height
Depth
Finished outside dimensions of the enclosure.
Holes, knockouts, gland plates, and connector openings.
Perforated or louvered zones — pattern details are confirmed during quote review.
PEM studs, standoffs, latches, hinges, and grounding hardware.
Settings are saved automatically in your browser.
Developed-area breakdown
How the flat-sheet estimate is built from your enclosure dimensions. FortiFab confirms bend deductions and panel layout during quote review.
- Shell surface area
- 2,304 in²
- × Panel factor (1.24)
- 2,857 in²
- + Door / cover allowance
- 129.6 in²
- Developed area each
- 2,986.6 in² · 20.74 ft²
- Weight each (Carbon steel)
- 50.82 lb
Style note
Adds allowance for door flanges, mounting rails, back panel, and hardware-ready details.
Door note
Include hinge side, latch side, gasket land, and hardware notes.
Your RFQ summary
Attach or paste these notes with drawings or sketches so FortiFab can confirm manufacturability.
- Style
- Control cabinet / utility box
- Door / cover
- Single hinged door
- Size
- 24" W × 30" H × 8" D
- Material
- Carbon steel · 0.06" thick
- Quantity
- 5 pcs
- Developed area
- 20.74 ft² each · 103.7 ft² total
- Weight
- 50.82 lb each · 254.1 lb total
- Panels
- ≈6 panels · complexity index 19
- Features
- 4 cutouts · 0 vent/louver areas · 8 hardware/PEM locations
Planning output only. FortiFab confirms final material, tooling, bend deductions, hardware, tolerances, finishes, and manufacturability during quote review.
Enclosure RFQ guide
Configure the enclosure information FortiFab needs before CAD review
This generator turns early enclosure intent into a cleaner RFQ for custom sheet-metal electrical enclosures, utility boxes, control cabinets, junction boxes, and vented covers. Include dimensions, material, finish, doors, cutouts, vents, hardware, and any environmental requirements without treating the page as a certification claim.
Common searches
- electrical enclosure generator
- custom sheet metal enclosure
- utility cabinet fabrication
- junction box enclosure
Best buyer use cases
- Control cabinets and equipment enclosures
- Vented covers, utility boxes, and gland-plate-ready shells
- Quote prep for enclosure bodies, doors, panels, and hardware layouts
Ready to turn this into a reviewed fabrication quote?
Send drawings, sketches, material, thickness, finish, quantity, and any fit-up requirements so FortiFab can review manufacturability.
Electrical enclosure RFQ FAQs
Use this generator to prepare a better enclosure quote package before engineering and shop review.
Estimated weight
50.82 lb each · 254.1 lb total